Any reasonable offers on the following will be considered! Because time is money, the most favorable offers will be accepted immediately without waiting for competitive bids.
| Aerotech | |
Aerotech ATS406 6" linear stage w/1050DC 50 oz-in servo motor, 3V/krpm tach, and built-in limit switches, 4mm lead precision ballscrew, used/excellent. (~$4200 when new) - $795 ( PICT ) |
| Aerotech |  |
-NEW!- Aerotech ATS100-100-U-20P 4" linear stage w/1035DC-MSOF-E1000LD 35 oz-in servo motor, with built-in limit switches, 2mm lead precision ground ballscrew, -NEW!- / NEVER USED / excellent. (>$3200 new) - $sold ( PICT PICT PICT PICT ) |
| Aerotech |  |
Aerotech ATS100-200-U-20P 8" travel linear stage ES13864 w/ flying lead for limit switches, motor mount & coupler, with built-in limit switches, 2mm lead precision ground ballscrew, looks new/excellent. - $995 ( PICT PICT PICT ) |
| Aerotech |  |
-NEW!- Aerotech ATS100-200-U-20P 8" linear stage w/1035DC-MSOF/E1000LD 35 oz-in servo motor, with built-in limit switches, 2mm lead precision ground ballscrew, -NEW!- / NEVER USED / excellent. (>$3700 new) - $sold ( PICT PICT PICT PICT ) |
| Aerotech |  |
Aerotech Accudex like ATS304 3 3/8"x3 3/8" travel (hefty ~84 lbs., seems to be cast iron frame) crossed roller x-y stage w/ ~6 15/16" square opening, ~5 3/8" height ~10"x10" footprint size (~23"x23" with motors installed), also comes w/ Torque Systems MT-3220-068HA Snapper servo motors equipped w/ 225L-0DAL-200-4A TrimStep Rotary Pulse Generator, with built-in limit switches, 0.2" lead precision ballscrew, and hand-turn knobs, used / good. - $2495 each ( PICT ) |
| Aerotech |  |
Aerotech -NEW!- ATS100-100U-20P 4" linear stage w/50SMB2-HMK 38 oz-in stepping motor, with built-in limit switches, 2mm lead precision ground ballscrew, -NEW!- / NEVER USED / Excellent. (>$2800 new, 3 available) - $949 each ( No.1 PICT ) ( No.2 PICT ) ( No.3 PICT ) ( No.4 PICT ) ( No.5 PICT ) ( No.6 PICT ) |
| Aerotech |  |
Aerotech ATS302E 2" linear stage w/50SMB2-HM 38 oz-in stepping motor, with built-in limit switches, 0.025" precision-ground leadscrew, used/nicks & scratches on top face & cover/ mechanically good. (>$1500 new) - $sold ( PICT PICT ) |
| Aerotech |  |
Aerotech ATS15010-2-02L 100mm (4") crossed-roller bearings linear stage w/101SMB2-HM 90 oz-in stepping motor, with built-in limit switches, 0.2"/rev leadscrew, used/minor blemishes/ mechanically excellent. - $595 ( PICT ) |
| Aerotech |  |
Aerotech ALS130-50 linear motor driven x-z table / x-z stage, 50mm travel in each axis, w/ encoders, used, untested - $contact ( PICT PICT ) |
| Aerotech |  |
Aerotech -NEW! In Origin Box - ALS20025 ES13504-2 linear motor driven x-y table / x-y stage, 250mm travel in each axis, comes with specifications and certification charts, (>$20k new) - New Surplus / Excellent Condition. - $4390 ( PICT ) |
| Aerotech |  |
Aerotech ATS404E 4" linear stage w/101SMB2-HM 90 oz-in stepping motor, with built-in limit switches, 0.2" lead precision ground ballscrew, used/scratches and some nicks/ mechanically seems good. (>$3500 when new) - $695 ( PICT PICT ) |
| Design Components (DCI) |  |
DCI (Design Components) CG-55 5"x5" travel x-y table w/ 150 oz-in stepping
motors, limit switches, 0.2" lead ballscrew (slight backlash
on lower stage) - $750 ( PICT ) |
| Design Components (DCI) |  |
DCI (Design Components) LP-45 ~5" travel linear stage mounted on Al plate, 0.1"
lead acme leadscrew, smooth movement (no motor, ask about available motors) - $310
( PICT PICT
PICT ) |
| Design Components (DCI) |  |
DCI (Design Components) RB6 series table designed w/ precisely pre-loaded recirculating ball bearings & protective bellow way covers,
RB6-60 6" travel, 200 lbs. capacity, 800 lbs. dynamic capacity (MSRP>$2k) - $589 ( PICT ) |
| Danaher / New England Affiliated Technologies (NEAT) |  |
Danaher / NEAT (New England Affiliated Technologies) looks like RMRE-200-SM w/ 2" travel ball way, w/ NEMA17 size dual-shaft stepping motor with turning knob, rotary encoder & built-in limit switches, used/very good condition (2 available) - $389 each ( PICT ) |
| Danaher / New England Affiliated Technologies (NEAT) |  |
- NEW! - Danaher / NEAT (New England Affiliated Technologies) looks like RMRE-400-SM w/ 4" travel ball way, w/ NEMA17 size dual-shaft stepping motor with turning knob, rotary encoder & built-in limit switches, appears to have electroless nickel-plated special finish, New still in wrap - $sold ( PICT ) |
| Danaher / New England Affiliated Technologies (NEAT) |  |
- NEW! - Danaher / NEAT (New England Affiliated Technologies) looks like RM-400-SM w/ 4" travel ball way, w/ NEMA17 size dual-shaft stepping motor with turning knob, & built-in limit switches, appears to have electroless nickel-plated special finish, comes with luibricant, New still in wrap (contact for availability) - $NA ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) looks like RM-400-SM w/ 4" travel ball way, w/ NEMA17 size dual-shaft stepping motor with turning knob, & built-in limit switches, has black anodized finish, wiring w/ no connectors (used, some wear from use but good functional condition, 1 available) - $269 ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) looks like RM-400-SM w/ 4" travel ball way, w/ NEMA17 size dual-shaft stepping motor with turning knob, & built-in limit switches, has black anodized finish, w/ connectors (used, slight blemishes, but good functional condition, 0 available) - $sold ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) looks like RM-400-SM w/ 4" travel ball way, w/ NEMA17 size dual-shaft stepping motor with turning knob, & built-in limit switches, has black anodized finish, w/ connectors (looks new, but selling as used, very good functional & cosmetic condition, 0 available) - $sold ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) like TM-200-SM w/ 2.5"x2.5" top mount pattern of 10-32 threaded taps at 1/2" increments along length of stage within range and 3.375"x3.5" bottom mount hole pattern, 2" travel ball way, w/ 53 oz-in double-shaft stepping motor (5VDC, 1.0A/phase), built-in limit switches, 0.1" lead leadscrew, 35lbs load capacity, used/excellent tight smooth motion (>$962 when new) - $sold ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) looks like TM-600-SM w/ 4"x8" top carriage, 6" travel ball way, built-in limit switches, 0.2" lead ACME leadscrew, used/very good mechanical condition w/ smooth motion - $389 ( PICT PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) looks like TM-400-SM w/ internal rotary encoder RE-2000 option, w/ 4"x6" top carriage, 4" travel ball way, built-in limit switches, 0.2" pitch leadscrew, NEAT motor & turn knob, used/excellent cosmetic & mechanical condition (3 available) - $649 each ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) HMS-1600-SM 16" , w/ 100 oz-in double-shaft stepping motor, built-in limit switches, 0.1" lead leadscrew, and bellows way covers, 200lbs capacity shuttle-type stage (ball/v-way), used/excellent (>$4300 when new) - $1295 ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) XYR-4040-SM 2"x2" travel monolithic crossed-roller x-y table, w/ double-shaft Compumotor QM-57-51 stepping motors and built-in limit switches, 0.2"/rev 5-pitch leadscrew, used/very good condition - $869 ( PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) 8"x8" monolithic x-y table like XY-1010-SM, BEAUTIFUL!, w/ double-shaft stepping motors and built-in limit switches, 2mm lead leadscrew, used/excellent - $1650 ( PICT PICT ) |
| New England Affiliated Technologies (NEAT) |  |
NEAT (New England Affiliated Technologies) XYR-1010-SM monolithic crossed-roller x-y table with 8"x8" travel, (1) axis has a Maxon RE035-071-34EAD200A gearhead servo motor & other axis has a Maxon 47.035.032-00.09-038 gearhead servo motor both equipped with Hewlett Packard (HP) HEDS-5500 shaft encoders, stage has built-in limit switches, appears to be a 2mm pitch ACME leadscrew, used, very good condition - $1950 ( PICT ) |
| New England Affiliated Technologies (NEAT) / Danaher Motion |  |
- NEW! - Danaher Motion / NEAT (New England Affiliated Technologies) 8"x8"x0.5" x-y-z stage, 8"x8" monolithic x-y table with cross-roller bearings (looks like Ballscrew XYR-1111), with z-elevator vertical motion unit, built-in limit switches & Renishaw RGH24-Z15A00A 0.5um linear encoders & wiring carrier, comes with vaccuum chuck for 200mm wafer, new surplus - $sold ( PICT ) |
| New England Affiliated Technologies (NEAT) / Danaher Motion |  |
Danaher Motion / NEAT (New England Affiliated Technologies) Ballscrew XYR series XYR-1111 8"x8" travel monolithic x-y table with 6mm cross-roller bearings, built-in limit switches & Renishaw RGH24-Y15D00A 0.1um linear encoders. These tables use 6mm crossed roller ways to minimize errors and provide high stiffness. Precision ground ballscrews allow higher speeds than leadscrew-driven XYR series tables. A specialized monolithic center couples the upper and lower axes, making the stage stiff and compact, and machining in orthogonality. Applications include: semiconductor wafer positioning, factory automation, microelectronics assembly, and laser machining, excellent condition - $contact ( PICT ) |
| Newport |  |
Newport Stage, looks like CTS25 Linear Stage which is used for high-speed high-accuracy positioning, #Z635B S/N-B04 01 13875 2116, 25mm travel stage with internal encoder and UE35CC DC Motor (U=24VDC, I=0.5A), used. - $sold ( PICT PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger UTS20PP miniature motorized linear stage, 20mm travel stage with UE30 stepping motor and encoder, 0.1um resolution, used. - $sold ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle miniature motorized linear stage, 20mm travel stage with UE30 gearhead stepping motor, used. - $295 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle miniature motorized linear stage, 20mm travel stage with UE30 gearhead stepping motor, used. - $295 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle miniature motorized linear stage, ~8mm travel stage with stepping motor, used (Note: Angle Bracket Not Included). - $295 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle UZ80PP Linear z Lift Stage, 4mm vertical travel stage with encoder and UE30PP 1 A/phase stepping motor, 1 micron resolution, (used, 2 available). - $569 each ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle UT100-25 Linear Stage, 25mm travel stage with encoder and UE30PP 1 A/phase stepping motor, 1um resolution, (used, 3 available). - $449 each ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle UT100-25 Linear Stage, 25mm travel stage, 0.1um resolution, with encoder and UE30PP stepping motor, used. - $589 ( PICT ) |
| Newport / Micro-Controle |  |
Newport / Micro-Controle UT100-75 Linear Stage, 75mm travel stage, 1um resolution, with encoder and UE30PP stepping motor, used. - $569 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle UT100-100 Linear Stage, 100mm travel stage, 0.1um resolution, with encoder and UE30PP stepping motor, used. - $749 ( PICT ) |
| Newport / Micro-Controle |  |
Newport / Micro-Controle xyz stage, composed of (2) UT100-100 linear stages with 100mm travel each at 1um resolution, with aperture option, encoders, and UE30PP stepping motors, and (1) UZ80PP for the z axis with about 4mm vertical travel at 1um resolution, encoder and UE30PP 1A/phase stepping motor, used. - $1589 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle UT100-150 Linear Stage, 150mm travel stage, 0.1um resolution, with encoder and stepping motor, used. - $1099 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle UT100-150 Linear Stage, 150mm travel stage, 10um resolution, with encoder and stepping motor, used. - $989 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle MT160-100 Linear Stage, 100mm travel stage with encoder and UE72PP 1.6 A/phase stepping motor side-mounted, 1um resolution, (used, some blemishes, very good functional condition. - $1295 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle MT160-100 Linear Stage, 100mm travel stage with encoder and UE72PP 1.6 A/phase stepping motor, 1um resolution, (used, some blemishes, as shown, very good functional condition. - $1295 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle MT160-100 Linear Stage, 100mm travel stage with encoder and UE72PP 1.6 A/phase stepping motor, 10um resolution, (used, some blemishes, very good functional condition. - $1195 ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle MT160-200 Linear Stage, 200mm travel stage with encoder and UE72PP 1.6 A/phase stepping motor, 1um resolution, (used/minor blemishes on cover plate/functions very nice, tight movement. - $sold ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Micro-Controle MT160-250 Linear Stage, 250mm travel stage with encoder and UE72PP 1.6 A/phase stepping motor, 1um resolution, comes with baseplate (used/minor blemishes on cover plate/functions very nice, tight movement. - $1500 ( PICT ) |
| Palomar Photonics Automation |  |
Palomar Photonics Automation xy stage from FAST6 photonics alignment setup, with linear motors and linear encoders. We do not
have much information on this unit (used, mechanically good condition, not tested) - $395
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 806004CT linear stage w/ Dynapar Controls E151000A863 Encoder, 4" travel stage, 6" wide x 8" long carriage,
Compumotor Zeta 57-83-MO motor, crossed-roller, 0.2" pitch ballscrew, optical limit & home sensors, (used, very nice condition) - $749
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 402002LNMP-D1L2C4M1 2" travel stage, square-rail bearing linear guide system design,
metric precision grade, 1mm lead, hall effect limit & home sensors, 0.25" bore bellows coupling, NEMA23 mount, 160 lbs. normal capacity
(used, very good condition) - $549 ( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 402002LNMP-D3L3C4M1 2" travel stage, square-rail bearing linear guide system design,
metric precision grade, 5mm lead, fixed optical limit & home switches, 0.25" bore bellows coupling, NEMA23 mount w/ MCG 1D23902-E1 60 oz-in
4.68A motor w/ Renco encoder p/n 77822-033, 160 lbs. normal capacity (used, very good condition) - $649
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 402006LNMP-D3L3C4M1 6" travel stage, square-rail bearing linear guide system design,
metric precision grade, 5mm lead, fixed optical limit & home switches, 0.25" bore bellows coupling, NEMA23 mount w/ MCG 1D23902-E1 60 oz-in
4.68A motor w/ Renco encoder p/n 77822-033, 160 lbs. normal capacity (used, very good condition) - $749
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 406006LN-type 6" travel stage, square-rail bearing linear guide system design,
0.2" lead, fixed optical limit switches, NEMA23 mount w/ Compumotor S57-102-MO stepper motor, 600 lbs. direct normal load capacity,
has pins for fixture and mounting for linear encoder but no encoder is attached (used, very good condition) - $contact
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 106081C10ELHO 8" travel stage, precision cross-roller design,
limit & home sensors, 0.1" lead, 240 lbs. capacity (used, scribe line on top face,
mechanically good condition, >$2800 when new) - $sold ( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 600000CT Series precision grade linear stage, 606004CTEPD1L2C1M1E1 4" travel stage, precision-grade
crossed-roller design, imperial mounting, 0.2" lead precision-ground ballscrew, +/-1.3um repeatability, magnetic limit & home sensors,
23 frame size, 360 lbs. load capacity, outstanding accuracy for high-duty-cycle applications,
(used, some cosmetic nicks/scratches from use, mechanically tight/precise movement, ~$4k when new) - $1100
( PICT ) |
| Aerotech |  |
Aerotech ART304 2' Rotation / Rotary Stage Positioner, w/ 50SMB2-HMK stepping motor & manual turn knob, used/very good condition. - $749 ( PICT ) |
| Aerotech |  |
Aerotech ART306 Rotation / Rotary Stage Positioner, w/ stepping motor&encoder assembly 50SMC2-E1000AS, includes integral cable, used/very nice. - $sold ( PICT ) |
| Micro-Controle / Newport |  |
Micro-Controle / Newport UR80-0.01 Rotation / Rotary Stage, 80mm diameter face with 30mm diameter aperture opening, 0.01 degree resolution when driven full-step mode w/ encoder, w/ UE30PP stepping motor, excellent for rotation applications in confined spaces, used. - $sold ( PICT ) |
| Micro-Controle / Newport |  |
Micro-Controle / Newport UR100-0.01 Rotation / Rotary Stage, 100mm diameter face with 50mm diameter aperture opening, 0.01 degree resolution when driven full-step mode w/ encoder, w/ UE30PP stepping motor, used/excellent condition. - $sold ( PICT ) |
| Klinger / Micro-Controle |  |
Klinger / Micro-Controle BG80-0.01 Goniometric Cradle with UE30PP stepping motor, 0.01 degree resolution w/ rotary encoder, used. - $contact ( PICT ) |
| Newport / Klinger / Micro-Controle |  |
Newport / Klinger / Micro-Controle BG80-0.001 Goniometric Cradle with UE30PP stepping motor, 0.001 degree resolution w/ rotary encoder, used. - $contact ( PICT ) |
| Newport |  |
Newport BG80 Goniometric Cradle with UE30CC DC motor, w/ rotary encoder, used/very good condition. - $contact ( PICT ) |
| Klinger / Micro-Controle / Newport |  |
Klinger / Micro-Controle / Newport RT120 PP Rotation / Rotary Stage, 120mm diameter face with 64mm diameter opening, 0.001 degree resolution, w/ UE30PP stepping motor and encoder, excellent physical and functional condition. (~$6,000 when new) - $sold ( PICT PICT) |
| Klinger / Micro-Controle / Newport |  |
Klinger / Micro-Controle / Newport RT200 Rotation / Rotary Stage, 200mm diameter face with 110mm diameter annular opening, 0.001 degree resolution, w/ UE72PP stepping motor and encoder, excellent physical and functional condition, this unit was removed from an aerospace mirror assembly that appeared to be unused. (~$8k when new) - $sold ( PICT ) |
| Klinger / Micro-Controle / Newport |  |
Klinger / Micro-Controle / Newport RT300 Rotation / Rotary Stage, 300mm diameter face with 180mm diameter opening, 0.01 degree resolution when driven full-step mode w/ encoder, w/ 200 step/rev stepping motor UE72PP rated 1.6 A/phase and manual adjustment knob & cover, used/excellent. (>$10,500 when new) - $sold ( PICT ) |
| Klinger / Micro-Controle / Newport |  |
Klinger / Micro-Controle / Newport RT300 Rotation / Rotary Stage, 300mm diameter face with 180mm diameter opening, has manual turn knob with scale (Although not motorized, can be motorized), used/excellent physical & functional condition. - $1849 ( PICT ) |
| Pacific Precision Labs |  |
Pacific Precision Labs (now JMAR-PSI) Rotation Stage, w/ Vexta stepping motor, w/ rotary encoder & readout, used. - $contact ( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 28180 8" diameter rotation stage, has 180:1 gear ratio, with Superior Electric Slo-Syn M062_FD03
NEMA 23 stepping motor, mounted on aluminum baseplate (used, few blemishes but in excellent mechanical condition) - $795
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 8" diameter rotation stage, with Superior Electric Slo-Syn M062_FD03
NEMA 23 stepping motor, (used, some scratches & blemishes, good mechanical condition) - $sold
( PICT ) |
| Parker / Daedal |  |
Parker / Daedal 20601-P H 6" diameter precision-grade rotary table, with home sensor, has 180:1 gear ratio, with Compumotor
CPLX57-120 size 23 motor, w/ ER-H option - mounted on base which houses an integral DRC 9000-count/rev encoder (#35-11-B15-9000-S673),
(new price was ~$6k, unit is used, excellent cosmetic & mechanical condition) - $sold
( PICT ) |
| American Precision Industries |  |
American Precision Industries (API) M232-04 NEMA23 frame stepping motor, 4.3VDC 1.8A/phs, w/ dual shaft (used, 2 avail.) - $89 each ( PICT ) |
| Applied Motion Products |  |
Applied Motion Products 5023-167D 1.8 degree Hybrid Step Motor, NEMA23 frame, 96.6 oz-in, Series: 4.9VDC 0.99A/phs, Parallel: 2.5VDC 1.98A/phs, w/ dual shaft, DB9 connectorized (New in bag, 13 avail.) - $59 each ( PICT PICT) |
| IMS / Moons |  |
- NEW! - Intelligent Motion Systems / Moons 23HS3406-07 NEMA23 frame stepping motor w/ elongated dual shaft, high torque (new, 14 available) - $95 each ( PICT ) |
| IMS |  |
Intelligent Motion Systems M-2222-6.OS NEMA23 frame stepping motor w/ single shaft, (used, 2 available) - $49 each ( PICT ) |
| Japan Servo |  |
Japan Servo NEMA34 frame stepping motor, KY86SM1-002 2.35VDC 0.9 deg, single shaft (0 avail.) - $sold ( PICT ) |
| Oriel Instruments |  |
- NEW! - Oriel Instruments DC Motor Mike Drive type 1 [0.375"(9.5mm)Dia. mount], model 18015, with spherical tip, use as a motorized replacement for Mitutoyo micrometers 148-104, 148-112, 148-801, 148-811 (>$400 new, a few available) - $89 each ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor AX57-102 NEMA23 frame stepping motor w/ rotary shaft encoder (used, 2 avail.) - $139 each ( PICT ) |
| Parker / Compumotor |  |
- NEW! - Parker / Compumotor AX83-135 NEMA34 frame stepping motor w/ dual shaft (old new surplus) - $149 ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor AX83-135 NEMA34 frame stepping motor w/ dual shaft (used) - $119 ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor M57-83 NEMA23 frame stepping motor w/ dual shaft (used, 4 available) - $79 each ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor S57-83-MO NEMA23 frame stepping motor w/ dual shaft, connectorized for S/SX drive (used, 2 available) - $109 each ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor S57-102-MO NEMA23 frame stepping motor w/ dual shaft, connectorized for S/SX drive (used, 0 available) - $sold ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor QM57-102 & S57-102-MO NEMA23 frame stepping motor w/ dual shaft, not connectorized (used, both available) - $contact ( PICT ) |
| Parker / Compumotor |  |
Parker / Compumotor CP106-220 NEMA42 frame Hybrid motor w/ built-in resolver. Some nicks & scratches (>$1000 new) used / not tested since I do not have the driver, but guaranteed - $120 ( PICT ) |
| NMB |  |
-NEW!- NMB 17PM-K304-05V NEMA17 frame stepper motor, new/excellent, several available - $9 each, or 3 for $23 ( PICT ) [The datasheet can be found at: http://www.nmbtech.com/pdf/motors/HybridSeriesStepMotors.pdf] |
| Superior Electric |  |
-NEW!- Superior Electric Slo-Syn Synchronous Stepping Motor MO61-LS-311 NEMA23 frame stepper motor, Hold 53 oz-in, 200 steps/rev, 20V 0.22A/phase, new/excellent, several available - $19 each ( PICT ) |
| Superior Electric |  |
-NEW!- Superior Electric Slo-Syn Synchronous Stepping Motor M063-LE09 NEMA23 frame stepper motor, Hold 150 oz-in, 200 steps/rev, 2.25V 4.6A/phase, NIB/excellent - $sold ( PICT ) |
| Vexta / Oriental Motor |  |
Vexta / Oriental Motor single shaft 2-phase 1.8deg/step stepping motor PH265-04-C18, 5V 1A per phase, (used, 15 available) - $24 each ( PICT ) |
| Vexta / Oriental Motor |  |
Vexta / Oriental Motor dual shaft stepping motor PK266-02B-C52, 3.6V 2A per phase, (used, 3 available) - $39 each ( PICT PICT ) |
| Vexta |  |
Vexta 23-size stepping motor C8384-9212H 2.5VDC 4.4A 1.8deg/step, single shaft, tapped flange holes, ~8mm shaft, high torque, (8 avail.) - $79 each ( PICT PICT ) |
| Helical |  |
- NEW! - Helical Large Flexible Shaft Coupling MCAC225-32K5-28K4 with integral clamp, 1" bore on one end & 7/8" on other end, 2.25"OD x 3.5" long (3 avail.) - $45 each ( PICT ) |
| Baldor |  |
Baldor linear stepping motor SQ0005A00, 2.0A/phs, 100% Duty, (used, 4 avail.) - $99 each ( PICT PICT ) |
| Danaher Controls |  |
- NEW! - Danaher Controls E15 Disc Integral Shaft Encoder, E151000A733, Never used in box (1 available) - $make offer ( PICT ) (2 used units available in fair condition, $each PICT ) |
| Dynamics Research |  |
- NEW! - Dynamics Research E83 Shaft Encoder, Never used in box (0 available) - $sold ( PICT ) |
| Heidenhain |  |
- NEW! - Heidenhain EXE 602E-001-Fach Interpolation Box, ID 246842-03, Never used in box (3 available) - $179 each ( PICT ) |
| Heidenhain |  |
- NEW! - Heidenhain EXE 650B-025-Fach Interpolation Box, ID 263380-30, Never used in box (2 available New in original box, 1 available New but not in original box) - $299 each ( PICT ) |
| Heidenhain |  |
- NEW! - Heidenhain Linear Encoder LF401C 100, ID 296958-02, Never used in box (1 available) - $make offer ( PICT ) |
| Renishaw |  |
- NEW! - Renishaw Linear Encoder Readhead RGH24-Z15F00A, 0.5um resolution, Never used in box (2 available) - $make offer ( PICT ) |
As applies to the above items, of course, not sold where prohibited.
Contact us for additional information:
Powell's Surplus / info@powellsurplus.com / revised Aug '08
